AI Agents : The Complete Guide to Understanding, Creating, and Using Autonomous Agents

AI Agents : The Complete Guide to Understanding, Creating, and Using Autonomous Agents
14 min read

An AI agent is a system that lets a language model choose for itself the steps and tools needed to achieve a goal, in a loop, until the task is completed or a limit stops it. It differs from an automated workflow, whose path is written in advance, and from an assistant that only acts on demand, turn by turn. This guide explains how it works, which type of agent to choose, how to test it, and how to manage its access and cost.

The word ‘agent’ is now slapped onto very different products, from a simple chatbot with web search to systems capable of chaining dozens of actions in a business application. To decide if you need one, and which one, you must return to the mechanism: who decides the next action, with what rights, and who verifies the result. This is the guiding thread of this page, which then refers to more specialized guides.

What is an AI agent and what can it actually do?

The most commonly used definition in the industry comes from the guide Building effective agents published by Anthropic in December 2024. The publisher separates two families of ‘agentic systems’: workflows, where models and tools are orchestrated by a predefined code path, and agents, where the model directs its own process and use of tools. In practice, this text summarizes, an agent is often just a language model that uses tools based on feedback from its environment, in a loop. To go further, read our article ‘What is an AI agent? Definition, operation, and examples.’

Concretely, an agent can do anything its tools allow: query a database, search the web, read a document, create a ticket, write and send an email, execute code, or fill out a form. It cannot do anything outside these tools and the rights attached to them. It also does not guarantee the correctness of what it produces: Anthropic emphasizes that autonomy comes at the cost of higher expense and a risk of errors that accumulate from one step to the next.

Workflow, tooled assistant, autonomous agent: three degrees of autonomy

The useful distinction is not between ‘AI’ and ‘not AI,’ but between three ways of distributing decision-making. The table below compares them on the points that matter when deploying.

Approach Who decides the steps Example Typical supervision Main risk
Deterministic workflow The designer, once and for all; the model only intervenes in a specific step Each received form is summarized by a model then recorded in the CRM Reading execution logs Cases not anticipated by the written path
Assistant with tools The model proposes an action, the user is present at each turn An assistant checks your calendar to propose a time slot The user reviews each response Misunderstood action but visible immediately
Autonomous agent The model chains several actions until the objective Processing a queue of customer requests, from reading to classification Caps, human validation of sensitive actions, logs Cascading errors, unintended actions, cost overruns

These boundaries are porous: a workflow can contain an agentic step, and an agent can be locked into a highly regulated workflow. The detailed comparison between an AI agent and a chatbot, the strict definition of what an AI agent is, and the trade-off between classic automation and an AI agent are each covered in a dedicated guide in this series.

How an AI agent works: model, tools, memory, and action loop

All agents rely on the same mechanics, regardless of the tool that hosts them. Four building blocks are enough to describe it.

  • The model: a large language model reads the objective, history, and results already obtained, then chooses the next action. Its ability to follow instructions and call tools correctly weighs more than its general score; the tool which AI model to choose for your task helps sort candidates.
  • The tools: each tool is described to the model by a name, a description, and a parameter schema. The model does not execute it itself: it produces a structured call request, which the application executes before returning the result to it.
  • The memory: short-term, it’s the history kept in the context window; long-term, it’s documents or notes that the agent fetches, often via a search in a RAG-type document database, a topic covered in our guide on local AI and RAG.
  • The loop and its limits: the agent observes the result of its action, decides on the next one, and stops when the objective is reached or when a stop condition is met (maximum number of iterations, duration, budget).

This alternation between reasoning and action was formalized as early as 2022 by the research paper ReAct, by Shunyu Yao and his co-authors, which interleaved model reasoning steps and actions on an external source. Anthropic emphasizes two practical points: the agent must obtain a ‘ground truth’ from its environment at each step (the actual result of a tool or code), and the description of tools deserves as much care as an interface intended for humans.

It remains to connect these tools. The Model Context Protocol (MCP), launched by Anthropic in November 2024 and then entrusted in December 2025 to the Agentic AI Foundation, a Linux Foundation structure, standardizes how an AI application connects to external services. Its specification, in its version dated July 28, 2026, describes servers that expose tools, resources, and message templates; our guide dedicated to MCP details its architecture. To delve deeper, consult ‘MCP: Understanding the Model Context Protocol and its uses.’

A refund request processed end-to-end

The following scenario is illustrative: it shows the loop on a common customer support case, one of the two uses Anthropic considers most suitable for agents along with software development. We detail this point in ‘AI Agents in Business: Ten Truly Useful Use Cases.’

  1. An email arrives: a customer reports a damaged package and requests a refund.
  2. The agent calls the customer search tool and retrieves the order.
  3. It consults the return policy in the document database and notes that the request is within the deadline.
  4. It prepares the refund, but the payment tool is configured to require human validation: the request goes to an advisor with the amount and justification.
  5. Once validation is received, the agent executes the refund, responds to the customer, and logs each step in the ticket.

The key point lies in step 4: the agent decides the sequence, but the irreversible action remains subject to a human. This setting, much more than the choice of model, determines the level of risk.

Which types of AI agents to choose based on your need?

Agents are distinguished less by their technology than by where they run and what triggers them. The following table groups the main families available in November 2026.

Family Trigger Typical uses Point of vigilance
Connected conversational assistant A user request Search, synthesis, one-off actions in connected applications Rights inherited from the user’s account
Workflow agent (n8n, Make, Zapier) An event: email, form, schedule Request sorting, record enrichment, prepared responses Execution without witness, hence the importance of logs
Code agent A development task Fix a bug, write tests, migrate code Access to the repository and project secrets
Navigation agent or personal agent A mission assigned by the user Compare offers, fill out forms, make reservations Malicious web content, payments
Multi-agent system An orchestrator agent that delegates Long tasks broken down into specialized subtasks Cost and traceability that multiply

Navigation agents are those that most change the relationship with websites and online services. Our article on the agentic web shows how personal assistants could buy, consult, and pay for content on behalf of the user, and why major platforms might seek to lock down access. Multi-agent systems, on the other hand, belong to a separate topic, multi-agent orchestration, which will be treated separately. To go further, read our article ‘Multi-Agent Orchestration: How to Coordinate Multiple AI Agents?’

The criteria that make the difference

Before choosing a type of agent, ask these six questions about the targeted task. The more the answers lean towards the right side of each alternative, the more a simple workflow or a supervised assistant will be preferable to an autonomous agent.

  • Variability: Do requests vary a lot from one to the next, or do they always follow the same path?
  • Number of steps: Is it unpredictable, or can you write it in advance?
  • Reversibility: Can an error be corrected with a click, or does it involve money, a customer, data?
  • Verifiability: Can the result be checked automatically (tests, rules), or only by an expert?
  • Data sensitivity: Does the agent handle public data, or personal and confidential data?
  • Volume: Does the task recur hundreds of times per month, or only a few times?

Anthropic explicitly recommends starting with the simplest solution and adding autonomy only when it measurably improves the outcome. For use cases of AI agents in business and choosing the best AI agent tools, two guides in this series detail examples and a comparison by use. We detail this point in ‘Best Tools to Create an AI Agent: Comparison by Use.’

How to build and test a first agent?

Two paths exist. Visual automation platforms (n8n, Make, Zapier Agents) allow creating an AI agent without coding, by assembling a trigger, a model, and tools; a tutorial dedicated to AI agent with n8n shows this assembly step by step. The development kits from model publishers offer more control, at the cost of engineering work. In both cases, the method remains the same. The topic is covered in a dedicated article: ‘Create an AI Agent with n8n: Tutorial, Costs, and Safeguards.’

  1. Choose a bounded task, frequent and low-risk: sorting incoming requests rather than ‘managing support.’
  2. Write the definition of success: what a completed task looks like, and what must never happen.
  3. Give the minimum of tools, read-only initially; add write rights one by one.
  4. Write the instructions: role, objective, rules, output format, conduct in case of doubt.
  5. Set caps: number of iterations, maximum duration, budget per execution. In n8n, for example, the AI Agent node limits the agent to 10 iterations by default.
  6. Create a test set from real cases, adding ambiguous, incomplete, or tricky cases.
  7. Launch a supervised pilot, with human validation of sensitive actions and logging of each step.

Testing is the most often botched step. Our guide for evaluating AI agents in business reminds us of a simple calculation: an agent that succeeds at a task 80% of the time has only about a 33% chance of succeeding five times in a row. Reliability must therefore be measured on repeated executions, not on a successful demonstration; the method for evaluating an AI agent will be covered in a specific guide in this series.

What makes a first agent fail

  • A vague objective, which lets the model interpret the mission.
  • Too many tools, or tools with vague descriptions, which cause poor call choices.
  • No stop condition, and thus loops that consume calls without completing.
  • Tests limited to easy cases, which mask failures on atypical requests.
  • Write rights granted from day one, before observing the actual behavior.

How to secure access and control costs?

OWASP, the reference foundation for application security, classifies ‘excessive agency’ among the top ten risks of applications based on language models (sheet LLM06:2025). It identifies three causes: unnecessary functions (a tool that can delete when reading is enough), overly broad permissions (an all-powerful service account instead of user rights), and too much autonomy (high-impact actions without validation). The countermeasures stem directly from this diagnosis: specialized rather than generic tools, least privilege, human approval for high-impact actions, and control of permissions in target systems rather than in the model’s judgment.

The second risk specific to agents is indirect prompt injection: an email, web page, or document processed by the agent contains instructions that hijack its behavior. OWASP, which makes it the number one risk (LLM01:2025), specifies that neither RAG nor model fine-tuning is enough to prevent it. The MCP specification sets the same principle on the connector side: the host application must obtain explicit user consent before invoking a tool, and tool descriptions are to be considered unreliable unless they come from a trusted server. AI agent security, agent governance, and prompt injection prevention are detailed in dedicated guides.

Regarding secrets, the rule is simple: an API key must never appear in the agent’s instructions nor in a shared file. It is stored in the platform’s credential vault, limited to a single use, and revoked if leaked.

Estimate the cost before launching

An agent consumes tokens on each loop turn, and the bill grows quickly because the context lengthens as tool results accumulate. The Anthropic pricing grid also reminds that tool definitions sent to the model count as input tokens. To set orders of magnitude, take a theoretical example with Claude Sonnet 5.5, billed $2 per million input tokens and $10 per million output tokens (prices verified in November 2026):

  • 8 model calls per task, with an average of 6,000 input tokens and 400 output tokens;
  • i.e., 48,000 input tokens (about $0.096) and 3,200 output tokens (about $0.032);
  • about $0.13 per task, so about $64 for 500 tasks per month, excluding platform subscription and supervision time.

These assumptions vary enormously from one agent to another: a new attempt, a large document, or a sub-agent can multiply the total. The AI agent cost calculator allows redoing this calculation with your scenario, your volumes, and your model, and the guide on the cost of an AI agent will detail hidden items: supervision, maintenance, evaluation.

What the AI Act says

The European AI regulation (AI Act) does not reason by technology but by use and risk level: an agent that screens applications does not have the same obligations as an agent that summarizes monitoring. According to the European Commission page dedicated to the text, consulted in November 2026, the amending regulation called the ‘digital omnibus’ (Regulation (EU) 2026/1744), which entered into force on July 27, 2026, has shifted the rules applicable to high-risk systems: they will apply from December 2, 2027 for sensitive areas listed in Annex III (employment, education, biometrics, among others) and from August 2, 2028 for systems integrated into products. The test to know if you are affected by the AI Act gives an initial orientation, and our guide to the AI Act in business will detail the obligations; none of this content replaces legal advice. The topic is covered in a dedicated article: ‘AI Act: Guide to Obligations and AI Governance in Business.’

Checklist before going into production

  • Each tool has a unique role and minimal rights, documented.
  • Irreversible actions (payment, sending, deletion) require human validation.
  • External content processed by the agent is considered unreliable.
  • API keys are stored in a vault, never in the instructions.
  • Caps on iterations, duration, and budget are active.
  • Each execution is logged: inputs, tool calls, decisions, cost.
  • A test set is replayed with each change to instructions, model, or tools.
  • A person is designated to review logs and stop the agent if needed.

Frequently asked questions about autonomous agents

Can an AI agent work without any supervision?

Technically yes, as long as it has a trigger and tools. In practice, no serious source recommends it for high-impact actions: both Anthropic and OWASP advocate for human checkpoints and stop conditions. Supervision can, however, become lighter over time, moving from systematic validation to sample control, once reliability is measured.

Do you need to know how to program to create an agent?

Not for a first agent: n8n, Make, or Zapier Agents offer visual editors where you assemble model, tools, and instructions. Code becomes useful when you need custom tools, fine integration into the information system, or precise cost control. In all cases, the quality of the agent depends more on task definition and testing than on the chosen tool.

What’s the difference between an AI agent and a classic automaton?

An automaton follows written rules: it is predictable, inexpensive, but cannot handle a case not anticipated. An agent interprets the situation and chooses its actions: it handles variety better, at the cost of a higher per-execution cost and less predictable behavior. Many successful deployments combine both, with an agent limited to steps requiring judgment.

Which model to use for an agent?

There is no universal best model. An agent primarily requires good reliability in tool calling and instruction following; a smaller, cheaper model may suffice for sorting tasks, a more powerful model is necessary for long reasoning. The interactive model comparator allows crossing price, context, and capabilities, and the comparison of AI models on this site will detail the selection method.

How to know if an agent is really working?

By measuring it on a representative set of cases, replayed several times: success rate, erroneous action rate, number of escalations to a human, cost and duration per task. Compare these figures to the situation without an agent, over the same period and volume. The limit of the exercise is known: a test set never covers all real cases, hence the interest in regularly reviewing a sample of production executions and adding each new failure to the test set.

S’abonner
Notification pour
guest

0 Commentaires
Le plus ancien
Le plus récent Le plus populaire
0
Nous aimerions avoir votre avis, veuillez laisser un commentaire.x